Tattoo machine debugging skills

　A tattoo machine to get his hand , allowing us to adjust only the following aspects : location before shrapnel, the shrapnel, the spacing, contact screws, damping ring , coil , rubber bands , the armature . The coil, core , racks , capacitors basically we are not moving . 　All adjustments are around two factors - the frequency and strength , I will be one of the law in the following 11 years. 　Former shrapnel : length width thickness hardness and bending angle will affect the frequency and strength of the machine. Long , narrow , thin, soft , low bending angle will make the machine slow frequency , power becomes larger. Conversely frequency becomes faster , smaller forces . 　Damping ring : the thickness of hard and soft , fine , let the soft slow frequency , strength increases. And vice versa. In fact, damping ring is extended before shrapnel , shrapnel can even do a good pre- damping ring, as the power play before the shrapnel to the maximum , maximum strength . 　Contact Screw: The closer the position of the contact point of the front edge of the tab , the slower the frequency , the greater the force, and vice versa. Contact screw presses more tightly force smaller , faster frequency . Suggested contacts screws as far forward , touch shrapnel , at most, one or two laps and then the next spin , so shrapnel maximize its power . 　After shrapnel : width hardness and bending angle will affect the machine's frequency , strength and length of the needle . Narrow , thin, soft frequencies will allow the machine slows down , the power increases. Conversely frequency becomes faster , smaller forces . The larger the longer the bending angle needle , the greater the power of the machine , the slower the frequency, and vice versa. 　After the pitch : refers to the machine from the back seat and armature , in fact, this distance is the length of shrapnel after the change can be achieved in several ways , adjust the length of the armature size platen after shrapnel , shrapnel forward after these three who can change the spacing. The larger the greater the strength of the pitch , the slower the frequency, and vice versa. 　Location coil : Front coil ( the coil close to the needle ) the greater the force more forward , the greater the distance the greater the force between the front and rear coil . As far forward before recommending coil , the coil do not move. 　Armature : armature material , the length of the severity , the armature is longer, the more severe the greater the force , the slower frequency. I only know the material aspects temporarily better off magnetic armature better. 　Rubber band : as little as possible , as long as you can control the beating of the needle , the right way to reduce needle loaded needle beating , so only twelve rubber band can be. 　Under normal circumstances stab color , totem need big machine power , frequency, slow , black and white sketches thorn traditional and machine power needs of small , fast frequency.

What Types of Tattoo Machines?

Liner
A liner machine is the base needed for a clean tattoo. A liner is used to outline the tattoo and for defining details and line work. The machine uses groups of needles most commonly in a circle pattern to deliver the ink into the skin. These traditional machines have parts such as coils and an armature bar, using electromagnets to run.

Shader
The shader is used to color in the tattoo or to add shading and depth. A shader machine is heavier than a liner, due to the heavier components. Along with larger groupings of flat rows of needles, a shader may have larger coils to give the machine extra power for coloring in a large area.

Rotary
A rotary machine, unlike a liner and shader, does not run on coils. It runs on a
a wheel, somewhat like a pulley system, and is a much quieter machine when running.
A rotary machine can be used as a liner or shader.

Warning
Never purchase a tattoo machine unless you have completed a professional apprenticeship in a tattoo shop and have been educated in the prevention of spreading disease. Tattooing without this kind of education can lead to scarring, staph infections and diseases like hepatitis for you or someone you tattoo.

New Arrival Tattoo machine Blue Peking Opera Mask Rotary Motor Gun Hybird Liner shader

It's steady body and low-vibrating mechanis will make your

tattooing much more comfortable for you and your client.
great both for liner and shader
Condition: Brand-new
weight: (Approx) 120g
Voltage:7-12V
Matches Regular Needle, Tube, Grip, Power
Silent, low-vibrating
Ergonomic
No Need for Rubber Band to Fix Needles
Adjustable Hitting Force
RCA Connection
Powerful Motor/the machine can work 8 hours continuously
Rotate Speed:2000--2500/Min
This gun is the best choice for the professional Tattooist

Starter Tattoo Kit 2 Machine Guns 6 color inks Supply Grip Tips

Tattoo machine 10 wrap coils, Can be set for both lining & shading, working voltage at 7V-10V, Frequency: 100-125 HZ,one-year warranty.
Mini Power Supply System. Built-in short-circuit protection and leakage protection makes it safer, steadier and more powerful when tattooing. 6-month warranty.
Foot pedal ,clip cord, power cord available.
Quality Tattoo Inks Approved By SGS & FDA, can be used in safety way.
6 inks 5ml,Colors include:
True black/Snow white opaque/Golden yellow/Bright red/Nahama blue/Light green
Tattoo grips: 5 pcs disposal 3/4" silica gel grip tubes.
Comfortable, non-slip, firm, professional grmachine, convenient to use!

ips for each
Tattoo needles: Individually blister packed & pre-sterilized tattoo needles & 5pcs & sizes at: 5RL
100 pcs small-size ink caps
1 pcs Metal Tattoo Ink Cup Holder
1 Pair of black gloves
1 Skin marking pen
50 pcs grommet keep needle steady
50 pcs rubber bands avoide machine vibration
50 pcs O-ring sure spring smooth
1 set Adjustment tool set for machine
1 pcs Practice skin, dual-sided & re-usable
1 pcs 4-part SPIRIT Stencil Paper
Professional Tattoo DVD last for 60 min long which can help you easy to pick up everything. This DVD is perfect for any level you are current at.
Compass Tattoo Instruction 28 papges Covers all FAQS from machines to inks. This is a great learning tool for any level tattoo fans.

How to shade a tattoo?

Any time you are scheduling to get started on a tattoo enterprise, then certainly you may be aware that you can find a necessity of tattoo kits consisting of at a minimum minimal of equipments, in which there are particular simple equipments like tattoo more, you will be clear the technic of tattoo, as a skilled tattoo artist is always be popular in tattoo enthusiasts. There are many tattooists failed in shading, when the tattoo is done, the customers are not satisfied with there patterns for the pattern design is not have a third dimension. So how can you give the customers a perfect tattoo? There are three steps you can have a reference.
Firstly, be careful about the angle of shading. The tattoo machine is in a proper angle and size. The angle is different between shading and lining. When shading, the angle must be vertical, while if you want it to be slant, and it usually 45 degree.
The best effect when shading is with the shortest time and the minimal trauma to make the most saturated color and make the human skin translucent state, it is the best state that you can see the subcutaneous blood vessels. You can only see a point if you through the color into the skin vertically, however a piece of surface will be shown when the angle is vertical. This not only reduces the injury of subcutaneous tissue but can reach large area of paint.
Secondly is the depth of shading. It is operated according to tattoo pattern. Because the needle through the skin too deep will lead to scar demitint, if it is to light, it will not be easy to paint. The tattoo needle depth should on the upper deck of the dermal papilla layer, it will be the most appropriate if the depth are between the epidermal basal layer and a sediment layer.
Thirdly, there are three methods shading from deep to light.
The first, adjust the depth by the weight of the technique. When through in the skin, be some heavier and when back, use lighter strength, so that it can have a light and shade change. In a word, the whole brushwork is from heavy to light.
The second, the ink capacity in the needle mouth can decide the shade change degree. When the tattoo artists touch the pigment to have tattoo, you will find the first color is heavy, and then become shallower one by one.
The third, if the tattoo ink is black, you can dilute the ink to achieve the change. The artists usually use pure black, light black and clear water to tattoo. This can show both a shade and light effect and a shade change effect. With a pure black in the most deep part and have a transition in the shallow part. Then have more light black ink to connect with it and transform to the light color part. When transforming, cover about one centimeter on the previous one so that it will be natural.
These are the steps and notes you should do when shading. Do not forget that a superior quality of tattoo kits must be assured. If you have any problem or suggestions, you can leave us a message.

Best quality Tattoo Machine Gun Kit Shader Liner

• This machine is professionally hand crafted with pure iron frame featuring quick magnetic response which makes the machine run smoothly and perfectly. The coils are evenly wrapped for best function and outstanding for its low heating.Low vibration frame makes it more reliable and steady.
• The production time for this tattoo machine takes about 1-3 days to complete. The best parts are chosen,the best handcraft is adopted and after hundreds of times of testing,this perfectly tuned piece of tattoo machinery comes to the world.
• Each piece of the machine is hand-forged ,so it will have slightly different markings. No two machines are identical, making each machine especially unique.