How to fix power clip

A common problem with a clip cord is when it is not making a proper connection.  There are 3 main causes for this.  One cause is when the clip cord contacts are not flush while it is connecting with the back binding post or back spring of the tattoo machine.  Feel the clipcord connectors; if it is pointy or jagged it is not sitting flush.  This can be fixed by filing down the clip cord connectors so that the ends are flat.  Another problem that occurs is if you have a clip cord that has a rubber sheath that extends out to the connectors, the sheath may be sticking out and physically preventing the connectors from completing an electrical circuit.  Fix this by using a pair of scissors and cutting back the rubber sheath so the clip cord connectors are fully exposed.  The final reason for this is a shot clip cord.  Unscrew the mono plug housing that plugs into the power supply.  There are two wires that connect into the mono plug.  If the exposed copper ends of the wires are touching, they are shorting and you will need to physically separate them.  If any of the wires are not connected to the mono plug, your clip cord is screwed.  If you have a soldering gun, you can reconnect it.  If you do not, you will have to replace the clipcord.

Why does my tattoo power box not work

The first two things to check for if your machine all of the sudden quits on you, Contact points, Tattoo Machine Capacitors, Power Supply, Foot Pedal, or Clip Cord. When you check these two, you should also check you other machine to see if it will work. If it in fact is the machine and is not fixable at that moment, you can always switch your needle bar and tube to the other machine and be able to reset the point gap in order to finish the tattoo.
If your machine just won’t work at all, you probably have an open in your circuit or a shortage. You want to make sure all your points are clean at first. The circuit will break if there is something caught between them. To open the contact hold the armature bar down with your thumb and blow hard on the points. If the blowing doesn’t clean them then you can try pulling a small strip of paper through the points when they are closed or use a nail file to clean out the contact. Then if that works you might want to readjust the point setting slightly so that you get that “buzz” at the right sound again.
Here are a vedio may be useful : http://www.youtube.com/watch?v=QaA9Q-37vC8

Hurricane Smart Touch Digital Tattoo Machine Power Supply Kit

Hurricane Smart Touch Digital Tattoo Machine Power Supply Kit
Specifications:
Full micro processor unit
Output: 0-18V (user selectable voltage increments: 0.1,0.2,0.5 V)
Build in 2A overloadcurrent protection
Newest design power supply
Stop watch, so you can accurately keep track of time taken on a job
Allows up to 4 machines pre set memory modes for liners/shaders
One button to decide how you like the pedal works: a long time work or just a short time
permanent memory, can keep long time memory of its working mode
Working voltage: 110V-240V, Frequency: 50/60HZ
Display: Volts, Amps, Speed, Duty, Time, Stop watch, Pre set status
Includes color match table/wall mount, power plug
Package Include:
1 x Tattoo Power Box
1 x Tattoo Power Plug
1 x Tattoo Power Adaptor
1 x Tattoo Power Stand
1 x RCA Clip Cord For Rotary
1 x Elegant Packing Box
1 x Operating Panel For Machine,Power,Ink,Cups

Mini Elfin Digital Tattoo Machine Power Supply Kit Top Quality

Pro Mini Blakc High quality LCD Digital Tattoo Power Supply
Specifications:
Color: Black
Display: LCD Display
Input voltage: AC 110v/220v 50Hz-60Hz
Output voltage: DC 0-15v / 2 amps (adjustable)
Output current: 2A
Features:
1. New LCD Digital Tattoo Power Supply Machine Kit Pro
2. A lower heat emission and working powerfully
3. Durable, a good aseismic capacity.
4. Appearance is luxuriant, elegant and generous.
5. Performance is extremely stable, the first choice of professional tattooists.
6. Fit for all kinds of tattoo machines
Package included:
1 x Power Supply
1 x Power cord