Steps for set up your tattoo kits

Setting up the tattoo kits relates to the personal safety and the quality of the tattoo images. So knowing how to set up the tattoo kits is important. Now I will introduce the steps to set up the tattoo kits.
1、Setting up the barrel. Let’s begin with the grip. The grip has two holes. One is used to tie the tube, and the other is for tying the tip. You should tie the two parts slightly with the adjustment.
Inserting the needle. You should make it clear that there are many different kinds of needle types. Knowing your objective and then choose the appropriate one to match your machine. What you need to do is pushing the needles through the tips gently and slowly. Note that the needle tip is in the same level with the needle. Then insert the grip to the tattoo machine. After doing this, tie up the tattoo machine with the rubber band just to make sure that the needle does not shake. 3、Clipping in the clip cord. Plugging the clip cord into the left hand of the power supply, and the other hand into the tattoo machine. 4、Adjusting your contact needle. Connecting the foot pedal with the tattoo power supply. Pushing the foot pedal to check if your tattoo machine running. If your machine doesn’t work, check the gold contact needle to see whether it is touching to the front of the spring, you must make sure that the gold contact needle touch the spring slightly, ‘cause it controls how hard the tattoo machine is. And try again, you will see the machine works. Always remember that the power should not be too slow.
All the steps have been shown, it’s not so hard to set up. And at the time you should be sure that your environment is clean,and it’s sterile best, so that it can safeguard your health at most.